Lubrication-pneumatic-piston-pumps: pm2 - 352120 - Product detail
header.h1
Ref.: 352120
BOMBA NEUMÁTICA DE PISTÓN PARA ACEITE PUMPMASTER 2, PM2 - 1:1, BIDÓN 205 L (55 GAL)
Ref.: 352120
BOMBA NEUMÁTICA DE PISTÓN PARA ACEITE PUMPMASTER 2, PM2 - 1:1, BIDÓN 205 L (55 GAL)
Bombas neumáticas de pistón de la serie PM2. Bombas neumáticas de baja presión para el transvase a altos caudales de aceites lubricantes o industriales, a través de mangueras o cortos circuitos de tubería, para llenado de tanques u otros recipientes. Concebidas para montaje sobre bidón o depósito, para acoplamiento directo o de forma mural, utilizando los accesorios de aspiración de fluido apropiados. Incorpora adaptador 2” (M). El diseño y los materiales de última generación empleados garantizan un alto rendimiento con un bajo consumo de energía. Motor alternativo de accionamiento neumático, de tipo diferencial, libre de mantenimiento. Pistón de bomba de doble efecto. Consumo de aire medido a 6 bar (87 psi) y a 150 ciclos/min. Máximo caudal salida libre medido a 7 bar (102 psi). Nivel de ruido medido a 1 m (3') de la bomba, a 7 bar (102 psi) de presión de aire y a salida libre. Instruction book: 835806.
Sobre este producto:
Ficha 352120
Datos técnicos
Documentación
Más información
| Fluidos compatibles | Aceite, Fluido de transmisión |
| Montaje de bomba | Bomba para bidón 205 l (55 gal) |
| Ratio de presión | 1:1 |
| Rango de presión de aire | 1,5-10 bar (21,75-145 psi) |
| Consumo de aire | 150 NL/min (5,3 scfm) |
| Máxima presión de salida | 10 bar (145 psi) |
| Diámetro efectivo de motor de aire | 35 mm (1,4") |
| Carrera del pistón neumático | 75 mm (3") |
| Entrega por ciclo | 20 l (5,3 gal) |
| Ciclos por minuto (aprox.) | 150 cycles |
| Caudal | 20 l/min (5,3 gal/min) |
| Máximo caudal a salida libre | 52 l/min (13,7 gal/min) |
| Entrada de aire | 1/4" NPSM (F) |
| Entrada de fluido | 1" BSP (F) |
| Tipo de entrada de fluido | Válvula de bola |
| Salida de fluido | 3/4" NPSM (F) |
| Materiales de zonas húmedas | Aluminio, Acero, NBR, Acetal, Poliuretano |
| Material bajos de bomba | Acero al carbono |
| Nivel sonoro | 80 dB |
| Altura tubo | 915 mm (36") |
| Altura total | 1200 mm (47") |
| Peso | 5,4 kg (12 lb) |
Bomba PM2 1:1 para transvase de aceite con boquerel. Bomba neumática de acoplamiento directo a bidón equipada con una manguera de transvase de gran...
Bomba PM2 1:1 para transvase de aceite con pistola contadora. Bomba neumática de acoplamiento directo a bidón equipada con una manguera de...
Bomba PM2 1:1 para transvase de aceite con pistola. Bomba neumática de acoplamiento directo a bidón equipada con una manguera de transvase y...
Bomba PM2 1:1 para transvase de grasa con válvula de paso de salida rígida. Bomba neumática de acoplamiento directo a bidón equipada con una...
Double post air operated pump hoist with inductor for ink piston pumps, 200 kg drums (pending code)
Allow to fix a pump horizontally or vertically to grease bags, totes and other type of containers. Female Cam-Lock connector, Connection thread...
Follower plate adaptor for pump hoist, gravity inductor, PM60 y PM80.
Follower plate adaptor for pump hoist, gravity inductor, PM45 y PM60.
Connection kit for tail grease piston pumps, PM80 50:1, double post inductor.
Allow to fix a pump horizontally or vertically to grease bags, totes and other type of containers. Male Cam-Lock adaptor, Fixes to the bottom end...
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Allow to fix a 50 kg (110 lb) grease drum to a lube truck bed when used together with drum covers 418 017. Instruction book: 841804.
Allow to fix a 185 kg (400 lb) grease drum to a lube truck bed when used together with drum covers 418 026. Instruction book: 841804.
Collector tray for pm2 - 2:1 oil pump kit, 454 100.
Bung adaptor for PM45 & PM60 for drum fixing. Also for fixing tube 736 771 to a 2" bung opening.
Pressure relief valve, 1/8" BSP (M) - 100 bar approx. opening pressure. When mounted to the pump body, prevents damage in the system caused by...
Pressure relief valve, 1/8" BSP (M) - 60 bar approx. opening pressure. When mounted to the pump body, prevents damage in the system caused by...
Includes 1 m x 3/8" air hose (247 710) with elbow (239 350), quick air coupling (253 138), air nipple (259 038) and 1,5 m x 1/2" oil hose...
Includes 1,8 m x 1/2" air hose (PN 248 018) with swivel elbow (PN 239 352), quick air coupler (PN 251 412), air nipple (PN 255 312), and 1,8 m...
Connection kit for grease piston pumps, PM35 , single post inductor.
Hose connection kit, includes 1 m x 3/8” air hose (PN 247 710) with 3/8” - 1/2” BSP (MM) connection threads, quick air coupler 251 438, air nipple...
Connection kit for grease piston pumps, PM45 and PM60, single post inductor.
Connection kit for grease piston pumps, PM45 and PM60, double post inductor.
Connection kit for grease piston pumps, PM60 - 3:1, double post inductor.
Connection kit for grease piston pumps, PM60 - 12:1, double post inductor.
Includes 1 m x 3/8” air hose (PN 247 710) with 3/8” - 1/2” BSP (MM) connection threads, quick air coupler 251 438, air nipple 255 338, 1,5 m x 3/8”...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 350 - 395 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 12,5 to 18 kg pails, 265 - 310 mm drum ext. Ø (min. - max)....
Standard duty drum covers. Very solid construction. With no adaptor. 50 kg drums, 360 - 405 mm drum ext. Ø (min. - max). For Pump Master 3 and Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 565 - 610 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 360 - 405 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 20 kg pails, 285 - 330 mm drum ext. Ø (min. - max). For Pump...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Single post air operated pump hoist for ink piston pumps, 50 kg drums Instruction book: 854813.
Maximum utility air operated hoist lifts and lowers pumps, making drum changes easier, faster and safer. Hoist arm adjusts to fit different pump...
Single post air operated pump hoist with gravity inductor for pm45 and pm60 piston pumps, 185 kg drums Instruction book: 854807.
Single post air operated pump hoist for ink piston pumps, 200 kg drums Instruction book: 854807.
Single post air operated pump hoist with gravity inductor for pm35 piston pumps, 185 kg drums Instruction book: 854807.
Mobile single post air operated pump hoist with inductor for pm35 piston pumps, 20 kg drums Instruction book: 854804.
Double post air operated pump hoist with inductor for pm60 piston pumps, 185 kg drums Instruction book: 842806.
Basic double post air operated pump hoist with inductor for pm60 piston pumps, 185 kg drums Instruction book: 842806.
Basic double post air operated pump hoist with inductor for pm45 piston pumps, 185 kg drums Instruction book: 842806.
Double post air operated pump hoist with inductor for ink piston pumps, 200 kg drums Instruction book: 854803.
Double post air operated pump hoist with inductor for piston pumps, 185 kg drums Instruction book: 842806.
1.000 mm, 1 1/2 "BSP (M), 48 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications. Instruction...
Suction tube for piston pumps, ø48 mm, 1400 mm x 1 1/2" BSP (M).
Suction tube for piston pumps, ø28 mm, 1400 mm x 1" BSP (M).
Suction tube for piston pumps, ø22 mm, 1400 mm x 3/4" BSP (M).
Suction assemblies for wall mounted PM35 5:1 stub pumps. For 1.000 litre IBC and 205 litre drums. 1.060 mm suction tube. Assemblies include 367 006...
Suction assemblies for wall mounted PM35 8:1 stub pumps. For 1.000 litre IBC and 205 litre drums. 1.060 mm suction tube. Assemblies include 367 006...
Pump suction kit, Includes suction assemble 367 000 and pump bracket 360 102. Instruction book: 896816.
For use with PM45 - 10:1 wall mounted universal stub pumps only. Includes a 42 mm x 2 m suction tube with foot valve and 2 m x 3/4" hose.
Suction assemblies for wall mounted stub pumps drums and tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2"...
Suction assemblies for wall mounted stub pumps, for tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2" bung...
Suction assemblies for wall mounted stub pumps, drums and tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2"...
Includes 1 m x 3/8" air hose 247 710 with 1/2" and 3/8" BSP (M) fittings, 1,5 m x 3/4" oil hose with 3/4" BSP (MM)...
1 m x 1/4" air hose 246 010, one 1/2" BSP (M) x 1/4" BSP (F) connection adaptor 945 516, 1 m x 1/2" oil hose with 1/2" BSP...
Allows to mount a bung fixed PM35 pump to a Heavy-Duty covers 418 026 and 418 017
Bracket ideal for PM45 and PM60 universal stub pumps
Floor pump bracket for piston pumps with short tube. Ideal for PM2 and PM4 pumps.
Bracket for fixing a pump laterally on a 1.000 l IBC. Requires pump bracket 360 102 (not included).
Bracket for fixing a pump and a hose reel laterally on a 1.000 l IBC Requires pump bracket 360 102 (not included)
Bracket for fixing a pump and a hose reel on top of a 1.000 l IBC. Requires pump bracket 360 102 (not included).
Wall pump bracket ideal for PM2 and PM4 piston pump with short tube.
PM45 10:1 pumps are pumps with a 2" pump tube and therefore these pumps fit through 2" bung openings on drums and tanks. All other PM45...
Bung adaptor for PM4 5:1 pumps. Pump tube outside diameter: 42 mm.
Bung adaptor for PM2 1:1 pumps. Pump tube outside diameter: 52 mm.
Bung adaptor for PM2 3:1 ratio pumps. Pump tube outside diameter: 34 mm.
