Lubrication-pneumatic-piston-pumps: pm35 - 530620 - Product detail
Ref.: 530620
BOMBA NEUMÁTICA DE PISTÓN PARA GRASA PUMPMASTER 35, PM35 - 60:1 BIDÓN 50 KG (120 LB)
Ref.: 530620
BOMBA NEUMÁTICA DE PISTÓN PARA GRASA PUMPMASTER 35, PM35 - 60:1 BIDÓN 50 KG (120 LB)
Bombas neumáticas de pistón de la serie PM35. Bombas neumáticas de muy alta presión para engrase forzado con alto caudal de entrega de grasa. Indicada para instalaciones con largos circuitos de tuberías con enrolladores de manguera, grandes pérdidas de carga acumuladas, bajas temperaturas, etc. Concebidas para montaje sobre tapa de bidón con acoplamiento directo, utilizando los accesorios apropiados. Sólida construcción con materiales de alta resistencia que garantizan un alto rendimiento en los trabajos más extremos. Motor alternativo de accionamiento neumático de 3” libre de mantenimiento. Pistón de bomba de doble efecto. Caudal medido a 80 ciclos/min. Consumo de aire medido a 5 bar (70 psi), con grasa NLGI-2, a 20 °C (68 °F) y a 80 ciclos/min. Nivel de ruido medido a 1 m (3') de la bomba, a 7 bar (102 psi) de presión de aire y a salida libre. Manual de instrucciones: 853823.
Sobre este producto:
Ficha 530620
Datos técnicos
Documentación
Más información
Fluidos compatibles | Grasa |
Montaje de bomba | Bomba para bidón 50 kg (120 lb) |
Ratio de presión | 60:1 |
Rango de presión de aire | 2-10 bar (29-145 psi) |
Consumo de aire | 450 NL/min (15,9 scfm) |
Máxima presión de salida | 600 bar (8700 psi) |
Diámetro efectivo de motor de aire | 80 mm (3,15") |
Carrera del pistón neumático | 80 mm (3,15") |
Entrega por ciclo | 900 g/min (2 lb) |
Ciclos por minuto (aprox.) | 80 cycles |
Caudal | 900 g/min (2 lb/min) |
Máximo caudal a salida libre | 2 kg/min (4,4 lb/min) |
Entrada de aire | 3/8" BSP (F) |
Tipo de entrada de fluido | Válvula chop-check |
Salida de fluido | 3/8" BSP (F) |
Materiales de zonas húmedas | Hierro fundido, Acero cromado endurecido, Acero, UHMWPE, NBR, PTFE, Vitón |
Material bajos de bomba | Acero al carbono |
Nivel sonoro | 80 dB |
Altura tubo | 730 mm (28,7") |
Altura total | 1017 mm (40") |
Peso | 10 kg (22 lb) |
Modelos
Código | Montaje de bomba | Salida de fluido | Altura tubo | Altura total |
---|---|---|---|---|
530620 | Bomba para bidón 50 kg (120 lb) | 3/8" BSP (F) | 730 mm (28,7") | 1017 mm (40") |
530631 | Bomba para depósitos de 12,5 - 20 kg (40 lb) | 3/8" NPT (F) | 516 mm (20,3") | 803 mm (31,6") |
530630 | Bomba para depósitos de 12,5 - 20 kg (40 lb) | 3/8" BSP (F) | 516 mm (20,3") | 803 mm (31,6") |
530621 | Bomba para bidón 50 kg (120 lb) | 3/8" NPT (F) | 730 mm (28,7") | 1017 mm (40") |
530611 | Bomba para bidón 185 kg (400 lb) | 3/8" NPT (F) | 925 mm (36,4") | 1212 mm (47,7") |
530610 | Bomba para bidón 185 kg (400 lb) | 3/8" BSP (F) | 925 mm (36,4") | 1212 mm (47,7") |
Kits
Equipo de engrase móvil para bidones 50 kg con bomba PM35. Equipo móvil con bomba neumática de alto rendimiento PM35 60:1 para utilizar con bidones...
Equipo de engrase carenado para bidones 50 kg con bomba PM35. Equipo móvil con bomba neumática de alto rendimiento PM35 60:1 y carenado de...
Equipos para suministro de grasa configurados mediante una bomba neumática de alta presión montada sobre un elevador neumático de una columna y un...
Kits de bomba neumática equipada PM35 para ser utilizada directamente sobre bidones originales de grasa de 50 kg o 185 kg. La bomba incluye los...
Accesorios
Allow to fix a 50 kg (110 lb) grease drum to a lube truck bed when used together with drum covers 418 017. Instruction book: 841804.
Allow to fix a 185 kg (400 lb) grease drum to a lube truck bed when used together with drum covers 418 026. Instruction book: 841804.
Includes 1 m x 3/8" air hose (247 710) with elbow (239 350), quick air coupling (253 138), air nipple (259 038) and 1,5 m x 1/2" oil hose...
Includes 1,8 m x 1/2" air hose (PN 248 018) with swivel elbow (PN 239 352), quick air coupler (PN 251 412), air nipple (PN 255 312), and 1,8 m...
Hose connection kit, includes 1 m x 3/8” air hose (PN 247 710) with 3/8” - 1/2” BSP (MM) connection threads, quick air coupler 251 438, air nipple...
Includes 1 m x 3/8” air hose (PN 247 710) with 3/8” - 1/2” BSP (MM) connection threads, quick air coupler 251 438, air nipple 255 338, 1,5 m x 3/8”...
Single post air operated pump hoist for ink piston pumps, 50 kg drums Instruction book: 854813.
Maximum utility air operated hoist lifts and lowers pumps, making drum changes easier, faster and safer. Hoist arm adjusts to fit different pump...
Single post air operated pump hoist with gravity inductor for pm45 and pm60 piston pumps, 185 kg drums Instruction book: 854807.
Single post air operated pump hoist for ink piston pumps, 200 kg drums Instruction book: 854807.
Single post air operated pump hoist with gravity inductor for pm35 piston pumps, 185 kg drums Instruction book: 854807.
Mobile single post air operated pump hoist with inductor for pm35 piston pumps, 20 kg drums Instruction book: 854804.
Double post air operated pump hoist with inductor for pm60 piston pumps, 185 kg drums Instruction book: 842806.
Basic double post air operated pump hoist with inductor for pm60 piston pumps, 185 kg drums Instruction book: 842806.
Basic double post air operated pump hoist with inductor for pm45 piston pumps, 185 kg drums Instruction book: 842806.
Double post air operated pump hoist with inductor for ink piston pumps, 200 kg drums Instruction book: 854803.
Double post air operated pump hoist with inductor for piston pumps, 185 kg drums Instruction book: 842806.
1.000 mm, 1 1/2 "BSP (M), 48 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications. Instruction...
Suction assemblies for wall mounted PM35 5:1 stub pumps. For 1.000 litre IBC and 205 litre drums. 1.060 mm suction tube. Assemblies include 367 006...
Suction assemblies for wall mounted PM35 8:1 stub pumps. For 1.000 litre IBC and 205 litre drums. 1.060 mm suction tube. Assemblies include 367 006...
Oil suction kit for wall mounting with support for tanks with a maximum height of 1.600 mm, suitable for pneumatic piston pumps PM2 and PM4 short...
Pump suction kit, Includes suction assemble 367 000 and pump bracket 360 102. Instruction book: 896816.
Includes 1 m x 3/8" air hose 247 710 with 1/2" and 3/8" BSP (M) fittings, 1,5 m x 3/4" oil hose with 3/4" BSP (MM)...
1 m x 1/4" air hose 246 010, one 1/2" BSP (M) x 1/4" BSP (F) connection adaptor 945 516, 1 m x 1/2" oil hose with 1/2" BSP...
Double post air operated pump hoist with inductor for ink piston pumps, 200 kg drums (pending code)
Allow to fix a pump horizontally or vertically to grease bags, totes and other type of containers. Female Cam-Lock connector, Connection thread...
2" (M) perforated plastic plug for 2" (M) return hose on PumpMaster pumps.
Follower plate adaptor for pump hoist, gravity inductor, PM60 y PM80.
Follower plate adaptor for pump hoist, gravity inductor, PM45 y PM60.
Connection kit for tail grease piston pumps, PM80 50:1, double post inductor.
Allow to fix a pump horizontally or vertically to grease bags, totes and other type of containers. Male Cam-Lock adaptor, Fixes to the bottom end...
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Collector tray for pm2 - 2:1 oil pump kit, 454 100.
Bung adaptor for PM45 & PM60 for drum fixing. Also for fixing tube 736 771 to a 2" bung opening.
Adjustable discharge valve limit between 10 and 20 bar, for discharge for PumpMaster pneumatic pumps that allow limiting the overpressure in the...
Adjustable discharge valve limit between 20 and 30 bar, for discharge for PumpMaster pneumatic pumps that allow limiting the overpressure in the...
Pressure relief valve, 1/8" BSP (M) - 100 bar approx. opening pressure. When mounted to the pump body, prevents damage in the system caused by...
Pressure relief valve, 1/8" BSP (M) - 60 bar approx. opening pressure. When mounted to the pump body, prevents damage in the system caused by...
Connection kit for grease piston pumps, PM35 , single post inductor.
Connection kit for grease piston pumps, PM45 and PM60, single post inductor.
Connection kit for grease piston pumps, PM45 and PM60, double post inductor.
Connection kit for grease piston pumps, PM60 - 3:1, double post inductor.
Connection kit for grease piston pumps, PM60 - 12:1, double post inductor.
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 350 - 395 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 12,5 to 18 kg pails, 265 - 310 mm drum ext. Ø (min. - max)....
Standard duty drum covers. Very solid construction. With no adaptor. 50 kg drums, 360 - 405 mm drum ext. Ø (min. - max). For Pump Master 3 and Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 565 - 610 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 360 - 405 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 20 kg pails, 285 - 330 mm drum ext. Ø (min. - max). For Pump...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Standard follower plate suitable for 50 kg cans 330-370mm ext. Ø (min - max). Follower plates eliminate air pockets and aid in pump priming. Rubber...
Standard follower plate suitable for 50 kg cans 360-405mm ext. Ø (min - max). Follower plates eliminate air pockets and aid in pump priming. Rubber...
Standard follower plate suitable for 185 kg cans 550-590 mm ext. Ø (min - max). Follower plates eliminate air pockets and aid in pump priming....
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Grease connection kit, suitable for PM3 55:1 pneumatic piston pumps. The kit includes: · 1 m x 3/8" (247 710) air hose with 3/8” (M) x 1/2”...
Adapter for fixing pneumatic piston pumps PM3+3 60: 1 with connecting thread 2" BSP (M), 30 mm.
Adapter for fixing pneumatic piston pumps PM35 60: 1 with connection thread 2" BSP (M), 35 mm.
Adapter for fixing pneumatic piston pumps PM3 55: 1 with connecting thread 2" BSP (M), 26 mm.
1.000 mm, 1" BSP (M), 28 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications.
Suction tube for piston pumps, ø48 mm, 1400 mm x 1 1/2" BSP (M).
673 mm, 1 1/2" BSP (M), 48 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications.
450 mm, 1" BSP (M), 28 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications.
660 mm, 1" BSP (M), 28 mm diameter tubing. Suitable for suction and suitable for short piston pumps in drum applications.
Suction tube for piston pumps, ø28 mm, 1400 mm x 1" BSP (M).
Suction tube for piston pumps, ø22 mm, 1400 mm x 3/4" BSP (M).
660 mm, 3/4" BSP (M), 22 mm diameter tubing. Suitable for suction and suitable for short piston pumps in drum applications.
450 mm, 3/4" BSP (M), 22 mm diameter tubing. Suitable for suction and suitable for short piston pumps in drum applications.
For use with PM45 - 10:1 wall mounted universal stub pumps only. Includes a 42 mm x 2 m suction tube with foot valve and 2 m x 3/4" hose.
Suction assemblies for wall mounted stub pumps drums and tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2"...
Suction assemblies for wall mounted stub pumps, for tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2" bung...
Suction assemblies for wall mounted stub pumps, drums and tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2"...
Wall bracket, flange mount pump (4 x M8).
Wall bracket, bung mount pump (2" F).
Allows to mount a bung fixed PM35 pump to a Heavy-Duty covers 418 026 and 418 017
For PM45, PM60 or similar universal stub pumps.
Bracket ideal for PM45 and PM60 universal stub pumps
Floor pump bracket for piston pumps with short tube. Ideal for PM2 and PM4 pumps.
Bracket for fixing a pump laterally on a 1.000 l IBC. Requires pump bracket 360 102 (not included).
Bracket for fixing a pump and a hose reel laterally on a 1.000 l IBC Requires pump bracket 360 102 (not included)
Bracket for fixing a pump and a hose reel on top of a 1.000 l IBC. Requires pump bracket 360 102 (not included).
Feet kit for floor piston pump bracket 360104, PM2 or PM4 pumps.
Console-support for fixing four pneumatic piston pumps, PM2 or PM4 pumps, on a wall. The console-support can be fixed to the wall or anchored to...
Wall pump bracket ideal for PM2 and PM4 piston pump with short tube.
PM45 10:1 pumps are pumps with a 2" pump tube and therefore these pumps fit through 2" bung openings on drums and tanks. All other PM45...
Bung adaptor for PM4 5:1 pumps. Pump tube outside diameter: 42 mm.
Bung adaptor for PM2 1:1 pumps. Pump tube outside diameter: 52 mm.
Bung adaptor for PM2 3:1 ratio pumps. Pump tube outside diameter: 34 mm.
Repuestos
Reportar un error