SAMOA Industrial
Ref.: 540010
PNEUMATIC PISTON INK PUMP, PUMPMASTER 35, PM35 - 8:1
Ref.: 540010
PNEUMATIC PISTON INK PUMP, PUMPMASTER 35, PM35 - 8:1
PM35 series air operated piston pumps. With the need for the small
printer to turn away from expensive and inconvenient 2 kg can, this
pump, when mounted on the 20 kg mobile single post Power Ram, offers a
low cost solution to the printer who does not require a central ink
distribution system. The Bantam PM35 series pump is ideal for local
transfer straight to the supply line. Flow rates with ink at 7 bar (100
psi) air inlet pressure. SAMOA recommends pumps to work at 30 cycles/min
for reduced wear on moving parts and minimized maintenance. Instruction
book: 854814.
Technical data
Documentation
More information
| Fluids | Other fluids |
| Target product type | Shovel Intake Piston Pumps |
| Model | PM35 |
| Application | Industrial Processes |
| Pressure ratio | 8:1 |
| Delivery | 1 kg/min (2,2 lb/min) |
| Delivery per cycle | 0,095 l (0,025 gal) |
| Cycles per minute (aprox.) | 10.5 cycles |
| Maximum free flow delivery | 1,3 kg/min (2,8 lb/min) |
| Air pressure operating range | 3-7 bar (40-100 psi) |
| Air consumption | 450 NL/min (15,9 scfm) |
| Maximum outlet pressure | 56 bar (815 psi) |
| Air motor effective diameter | 90 mm (3,5 ") |
| Air motor stroke | 75 mm (3 ") |
| Air inlet | 3/8" BSP (F) / 3/8" NPT (F) |
| Fluid Inlet | 2" BSP (M) |
| Fluid inlet type | Ball check |
| Fluid outlet | 3/4" BSP (F) / 3/4" NPT (F) |
| Wetted materials | Acetal, Viton, Carbon steel, Cast iron, Bronze, UHMWPE |
| Pump tube material | Carbon steel |
| Tube height | 350 mm (13,8 ") |
| Pump Mounting | 12,5 - 20 kg (40 lb) pails |
| Total height | 866 mm (34 ") |
| Sound level | 80 dB |
| Weight | 17 kg (37,5 lb) |
General
Instruction manuals
Catalogs
Spare parts
Category documents 04
Category documents 05
Category documents 06
Ref.
Process
999999
Ref.
Process
391001.270
