Lubrication-pneumatic-piston-pumps: pm35 - 530631 - Product detail
SAMOA Industrial
Ref.: 530631
PNEUMATIC PISTON GREASE PUMP, PUMPMASTER 35, PM35 - 60:1, 12,5 - 20 KG (40 LB) PAILS, NPT
Ref.: 530631
PNEUMATIC PISTON GREASE PUMP, PUMPMASTER 35, PM35 - 60:1, 12,5 - 20 KG (40 LB) PAILS, NPT
PM35 series air operated piston pumps. Heavy-Duty double acting pumps that combine high pressure (60:1 pressure ratio) and volume delivery. Recommended for use in distribution and greasing systems that include pipe lines, hose reels, etc. with up to 2 simultaneous use outlets even though the number of outlets in the system can be higher. Includes a height adjustable 2” BSPM bung adaptor. Delivery at 80 cycles/min. Air consumption at 5 bar (70 psi) air pressure, NLGI-2 grease at 20 °C (68 °F) and 80 cpm. Noise level measured at 1 m (3.3’) from the pump, 7 bar (100 psi) air pressure and free delivery. Instruction book: 853823.
About this product:
File 530631
Technical data
Documentation
More information
| Compatible fluids | Grease |
| Pump mounting | 12,5 - 20 kg (40 lb) pails |
| Pressure ratio | 60:1 |
| Air pressure operating range | 2-10 bar (29-145 psi) |
| Air consumption | 450 NL/min (15,9 scfm) |
| Maximum outlet pressure | 600 bar (8700 psi) |
| Air motor effective diameter | 80 mm (3,15") |
| Air motor stroke | 80 mm (3,15") |
| Delivery per cycle | 900 g/min (2 lb) |
| Cycles per minute (aprox.) | 80 cycles |
| Delivery | 900 g/min (2 lb/min) |
| Maximum free flow delivery | 2 kg/min (4,4 lb/min) |
| Air inlet | 3/8" NPT (F) |
| Fluid inlet type | Chop-check |
| Fluid outlet | 3/8" NPT (F) |
| Wetted materials | Cast iron, Hard chromed steel, Steel, UHMWPE, NBR, PTFE, Viton |
| Pump tube material | Carbon steel |
| Sound level | 80 dB |
| Tube height | 516 mm (20,3") |
| Total height | 803 mm (31,6") |
| Weight | 9 kg (19,8 lb) |
Models
| Code | Pump mounting | Fluid outlet | Tube height | Total height |
|---|---|---|---|---|
| 530631 | 12,5 - 20 kg (40 lb) pails | 3/8" NPT (F) | 516 mm (20,3") | 803 mm (31,6") |
| 530630 | 12,5 - 20 kg (40 lb) pails | 3/8" BSP (F) | 516 mm (20,3") | 803 mm (31,6") |
| 530621 | 50 kg (120 lb) drums | 3/8" NPT (F) | 730 mm (28,7") | 1017 mm (40") |
| 530620 | 50 kg (120 lb) drums | 3/8" BSP (F) | 730 mm (28,7") | 1017 mm (40") |
| 530611 | 185 kg (400 lb) drums | 3/8" NPT (F) | 925 mm (36,4") | 1212 mm (47,7") |
| 530610 | 185 kg (400 lb) drums | 3/8" BSP (F) | 925 mm (36,4") | 1212 mm (47,7") |
Double post air operated pump hoist with inductor for ink piston pumps, 200 kg drums (pending code)
Allow to fix a pump horizontally or vertically to grease bags, totes and other type of containers. Female Cam-Lock connector, Connection thread...
2" (M) perforated plastic plug for 2" (M) return hose on PumpMaster pumps.
Follower plate adaptor for pump hoist, gravity inductor, PM60 y PM80.
Follower plate adaptor for pump hoist, gravity inductor, PM45 y PM60.
Connection kit for tail grease piston pumps, PM80 50:1, double post inductor.
Allow to fix a pump horizontally or vertically to grease bags, totes and other type of containers. Male Cam-Lock adaptor, Fixes to the bottom end...
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Allow to fix a 50 kg (110 lb) grease drum to a lube truck bed when used together with drum covers 418 017. Instruction book: 841804.
Allow to fix a 185 kg (400 lb) grease drum to a lube truck bed when used together with drum covers 418 026. Instruction book: 841804.
Collector tray for pm2 - 2:1 oil pump kit, 454 100.
Bung adaptor for PM45 & PM60 for drum fixing. Also for fixing tube 736 771 to a 2" bung opening.
Adjustable discharge valve limit between 10 and 20 bar, for discharge for PumpMaster pneumatic pumps that allow limiting the overpressure in the...
Adjustable discharge valve limit between 20 and 30 bar, for discharge for PumpMaster pneumatic pumps that allow limiting the overpressure in the...
Pressure relief valve, 1/8" BSP (M) - 100 bar approx. opening pressure. When mounted to the pump body, prevents damage in the system caused by...
Pressure relief valve, 1/8" BSP (M) - 60 bar approx. opening pressure. When mounted to the pump body, prevents damage in the system caused by...
Includes 1 m x 3/8" air hose (247 710) with elbow (239 350), quick air coupling (253 138), air nipple (259 038) and 1,5 m x 1/2" oil hose...
Includes 1,8 m x 1/2" air hose (PN 248 018) with swivel elbow (PN 239 352), quick air coupler (PN 251 412), air nipple (PN 255 312), and 1,8 m...
Connection kit for grease piston pumps, PM35 , single post inductor.
Hose connection kit, includes 1 m x 3/8” air hose (PN 247 710) with 3/8” - 1/2” BSP (MM) connection threads, quick air coupler 251 438, air nipple...
Connection kit for grease piston pumps, PM45 and PM60, single post inductor.
Connection kit for grease piston pumps, PM45 and PM60, double post inductor.
Connection kit for grease piston pumps, PM60 - 3:1, double post inductor.
Connection kit for grease piston pumps, PM60 - 12:1, double post inductor.
Includes 1 m x 3/8” air hose (PN 247 710) with 3/8” - 1/2” BSP (MM) connection threads, quick air coupler 251 438, air nipple 255 338, 1,5 m x 3/8”...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Covers are made from heavy steel gauge to withstand hard usage. Cover flange provides rigidity and maintains solid position on drum. Grease pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 350 - 395 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 12,5 to 18 kg pails, 265 - 310 mm drum ext. Ø (min. - max)....
Standard duty drum covers. Very solid construction. With no adaptor. 50 kg drums, 360 - 405 mm drum ext. Ø (min. - max). For Pump Master 3 and Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 565 - 610 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 50 kg drums, 360 - 405 mm drum ext. Ø (min. - max). For Pump...
Standard duty drum covers. Very solid construction. With 2" BSP (F) bung opening. 20 kg pails, 285 - 330 mm drum ext. Ø (min. - max). For Pump...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Standard follower plate suitable for 50 kg cans 330-370mm ext. Ø (min - max). Follower plates eliminate air pockets and aid in pump priming. Rubber...
Standard follower plate suitable for 50 kg cans 360-405mm ext. Ø (min - max). Follower plates eliminate air pockets and aid in pump priming. Rubber...
Standard follower plate suitable for 185 kg cans 550-590 mm ext. Ø (min - max). Follower plates eliminate air pockets and aid in pump priming....
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Follower plates eliminate channeling and air pockets, keep lubricant free from contaminants, remove all grease from the drum and aid pump prime. HD...
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Standard duty follower plates eliminate air pockets and aid pump prime. Rubber flange minimizes waste. With handle for removing from empty drums....
Grease connection kit, suitable for PM3 55:1 pneumatic piston pumps. The kit includes: · 1 m x 3/8" (247 710) air hose with 3/8” (M) x 1/2”...
Adapter for fixing pneumatic piston pumps PM3+3 60: 1 with connecting thread 2" BSP (M), 30 mm.
Adapter for fixing pneumatic piston pumps PM35 60: 1 with connection thread 2" BSP (M), 35 mm.
Adapter for fixing pneumatic piston pumps PM3 55: 1 with connecting thread 2" BSP (M), 26 mm.
Single post air operated pump hoist for ink piston pumps, 50 kg drums Instruction book: 854813.
Maximum utility air operated hoist lifts and lowers pumps, making drum changes easier, faster and safer. Hoist arm adjusts to fit different pump...
Single post air operated pump hoist with gravity inductor for pm45 and pm60 piston pumps, 185 kg drums Instruction book: 854807.
Single post air operated pump hoist for ink piston pumps, 200 kg drums Instruction book: 854807.
Single post air operated pump hoist with gravity inductor for pm35 piston pumps, 185 kg drums Instruction book: 854807.
Mobile single post air operated pump hoist with inductor for pm35 piston pumps, 20 kg drums Instruction book: 854804.
Double post air operated pump hoist with inductor for pm60 piston pumps, 185 kg drums Instruction book: 842806.
Basic double post air operated pump hoist with inductor for pm60 piston pumps, 185 kg drums Instruction book: 842806.
Basic double post air operated pump hoist with inductor for pm45 piston pumps, 185 kg drums Instruction book: 842806.
Double post air operated pump hoist with inductor for ink piston pumps, 200 kg drums Instruction book: 854803.
Double post air operated pump hoist with inductor for piston pumps, 185 kg drums Instruction book: 842806.
1.000 mm, 1 1/2 "BSP (M), 48 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications. Instruction...
1.000 mm, 1" BSP (M), 28 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications.
Suction tube for piston pumps, ø48 mm, 1400 mm x 1 1/2" BSP (M).
673 mm, 1 1/2" BSP (M), 48 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications.
450 mm, 1" BSP (M), 28 mm diameter tube. Suitable for suction and suitable for short piston pumps in drum applications.
660 mm, 1" BSP (M), 28 mm diameter tubing. Suitable for suction and suitable for short piston pumps in drum applications.
Suction tube for piston pumps, ø28 mm, 1400 mm x 1" BSP (M).
Suction tube for piston pumps, ø22 mm, 1400 mm x 3/4" BSP (M).
660 mm, 3/4" BSP (M), 22 mm diameter tubing. Suitable for suction and suitable for short piston pumps in drum applications.
450 mm, 3/4" BSP (M), 22 mm diameter tubing. Suitable for suction and suitable for short piston pumps in drum applications.
Suction assemblies for wall mounted PM35 5:1 stub pumps. For 1.000 litre IBC and 205 litre drums. 1.060 mm suction tube. Assemblies include 367 006...
Suction assemblies for wall mounted PM35 8:1 stub pumps. For 1.000 litre IBC and 205 litre drums. 1.060 mm suction tube. Assemblies include 367 006...
Oil suction kit for wall mounting with support for tanks with a maximum height of 1.600 mm, suitable for pneumatic piston pumps PM2 and PM4 short...
Pump suction kit, Includes suction assemble 367 000 and pump bracket 360 102. Instruction book: 896816.
For use with PM45 - 10:1 wall mounted universal stub pumps only. Includes a 42 mm x 2 m suction tube with foot valve and 2 m x 3/4" hose.
Suction assemblies for wall mounted stub pumps drums and tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2"...
Suction assemblies for wall mounted stub pumps, for tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2" bung...
Suction assemblies for wall mounted stub pumps, drums and tanks. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2"...
Includes 1 m x 3/8" air hose 247 710 with 1/2" and 3/8" BSP (M) fittings, 1,5 m x 3/4" oil hose with 3/4" BSP (MM)...
1 m x 1/4" air hose 246 010, one 1/2" BSP (M) x 1/4" BSP (F) connection adaptor 945 516, 1 m x 1/2" oil hose with 1/2" BSP...
Allows to mount a bung fixed PM35 pump to a Heavy-Duty covers 418 026 and 418 017
Bracket ideal for PM45 and PM60 universal stub pumps
Floor pump bracket for piston pumps with short tube. Ideal for PM2 and PM4 pumps.
Bracket for fixing a pump laterally on a 1.000 l IBC. Requires pump bracket 360 102 (not included).
Bracket for fixing a pump and a hose reel laterally on a 1.000 l IBC Requires pump bracket 360 102 (not included)
Bracket for fixing a pump and a hose reel on top of a 1.000 l IBC. Requires pump bracket 360 102 (not included).
Feet kit for floor piston pump bracket 360104, PM2 or PM4 pumps.
Console-support for fixing four pneumatic piston pumps, PM2 or PM4 pumps, on a wall. The console-support can be fixed to the wall or anchored to...
PM45 10:1 pumps are pumps with a 2" pump tube and therefore these pumps fit through 2" bung openings on drums and tanks. All other PM45...
Bung adaptor for PM4 5:1 pumps. Pump tube outside diameter: 42 mm.
Bung adaptor for PM2 1:1 pumps. Pump tube outside diameter: 52 mm.
Bung adaptor for PM2 3:1 ratio pumps. Pump tube outside diameter: 34 mm.
